Nikon 1 V1 User Manual

125
i
Autoexposure Lock
Exposure lock is used to recompose photographs after metering
exposure. It is most effective when used with center-weighted or
spot metering (0 124) to frame off-center subjects that are
much brighter or darker than their surroundings or to optimize
exposure for an object other than your main subject.
1
Meter exposure.
Position the subject in the center of
the frame and press the shutter-
release button halfway to meter expo-
sure. Check that the focus area is dis-
played in green.
2
Lock exposure.
With the shutter-release button
pressed halfway and the subject posi-
tioned in the focus area, press 1 (A)
to lock exposure. While exposure lock
is in effect, an AE-L indicator will be dis-
played.
3
Recompose the photograph.
Keeping the 1 (A) button pressed, recompose the photo-
graph and shoot. The option selected for Metering can not
be changed while exposure lock is in effect.
A
See Also
For information on changing the role of
the 1 (A) button, see page 156.

Nikon 1 V1 Specifications

General

Sensor Type	CMOS
Sensor Size	13.2 x 8.8 mm
Effective Pixels	10.1 million
Screen Resolution	921, 000 dots
Dimensions	113 x 76 x 43.5 mm
Camera Type	Mirrorless
Lens Mount	Nikon 1 mount
Focal Length Multiplier	2.7x
Shutter Speed	30 - 1/16000 sec
Storage Media	SD/SDHC/SDXC
ISO Sensitivity	ISO 100-3200, expandable to 6400
Autofocus System	Hybrid AF with contrast and phase detection
Continuous Shooting Speed	Up to 60 fps
Viewfinder	Electronic (1.44M-dot)
Screen Size	3.0 inches
Video Recording	Full HD 1080p at 30fps
Battery Life	Approx. 350 shots (CIPA)
Weight	294 g (body only)