Nikon 1 V1 User Manual

129
i
3
Measure white balance.
When the camera is ready to measure
white balance, a flashing L will be
displayed. Before the indicator stops
flashing, frame the reference object so
that it fills the display and press the
shutter-release button all the way
down. No photograph will be
recorded; white balance can be mea-
sured accurately even when the cam-
era is not in focus.
4
Check the results.
If the camera was able to measure a
value for white balance, the message
shown at right will be displayed. To
return to shooting mode immediately,
press the shutter-release button half-
way.
If lighting is too dark or too bright, the
camera may be unable to measure
white balance. The message at right
will be displayed. Return to Step 3 and
measure white balance again.

Nikon 1 V1 Specifications

General

Sensor Type	CMOS
Sensor Size	13.2 x 8.8 mm
Effective Pixels	10.1 million
Screen Resolution	921, 000 dots
Dimensions	113 x 76 x 43.5 mm
Camera Type	Mirrorless
Lens Mount	Nikon 1 mount
Focal Length Multiplier	2.7x
Shutter Speed	30 - 1/16000 sec
Storage Media	SD/SDHC/SDXC
ISO Sensitivity	ISO 100-3200, expandable to 6400
Autofocus System	Hybrid AF with contrast and phase detection
Continuous Shooting Speed	Up to 60 fps
Viewfinder	Electronic (1.44M-dot)
Screen Size	3.0 inches
Video Recording	Full HD 1080p at 30fps
Battery Life	Approx. 350 shots (CIPA)
Weight	294 g (body only)