66
t
Remote control mode: From a distance of
5 m (16 ft) or less, aim the ML-L3 at the
infrared receiver on the front of the
camera (0 2) and press the ML-L3
shutter-release button. If 2s delay is
selected for Remote control in the
setup menu (0 163), the self-timer lamp will light for about
two seconds before the shutter is released. If Quick response
is selected, the self-timer lamp will flash after the shutter has
been released.
Note that the timer may not start or a photograph may not be
taken if the camera is unable to focus or in other situations in
which the shutter can not be released. Turning the camera off
cancels self-timer and remote control modes. Remote control
mode is cancelled automatically if no operations are performed
for about ten minutes after the mode is selected in Step 2.
To Next Page
Loading...
