Nikon 1 v2 - Printing Pictures One at a Time

103
Q
Printing Pictures One at a Time
1
Select a picture.
Press 4 or 2 to view additional pic-
tures. Rotate the command dial right
to zoom in on the current frame
(0 86; rotate the dial left to exit
zoom). To view nine pictures at a time,
rotate the dial left when a picture is
displayed full frame. Use the multi selector to highlight pic-
tures, or rotate the command dial right to display the high-
lighted picture full frame.
2
Adjust print options.
Press J to display PictBridge print options (0 107). Press 1
or 3 to highlight options and press 2 to select.
3
Start printing.
Highlight Start printing and press J
to start printing. To cancel before all
copies have been printed, press J
again.
D
Selecting Photographs for Printing
Movies and NEF (RAW) photographs (0 123) can not be selected for
printing. If Motion Snapshots are selected, only the photographs will
be printed; the movie portion will not be printed. If photographs taken
with the Smart Photo Selector are selected, only the best shot will be
printed.
Print setup