BASIC OPERATION
Installing Batteries
“I, Slide down the battery
' chamber cover and lift
it out.
2, Load four 1.5V AA-type
' penlight alkaline-
manganese or manganese
batteries or 1.2 V NiCd bat
teries into the battery
chamber.
For battery information, see page
50.
0^ To reattach battery
‘ chamber cover, align the
black indices on the cover
and flash unit, then slide the
cover up as far as it goes.
f As an external power source, Nikon DC Unit ^
I SD-7 is optionally available. See page 52. I
To Next Page
Loading...
