60° or more
Bounce Flash Photography Procedure
1. Select a ceiling to bounce the flash from. In color
photography, select a white or silver ceiling—other
wise, color photographs come out with an unnatural
color cast similar to that of the reflecting surface.
2. Tilt the flash head upwards, towards the ceiling.
To avoid uneven illumination, tilt flash head back
60° or more.
3. Set flash mode selector to TTL for TTL auto flash
operafion, At or A2 for non-TTL aufo flash oper-
afion, then turn on the flash unif. The bounce indi
cator blinks.
To Next Page
Loading...
