SETTING POWER SWITCH
STBY (STANDBY) Position
Use to conserve energy and shorten recycling time.
With Nikon F-501/N2020, F-401/N4004, F-301/
N2000, FA, FE2and FG:
Use the SB-22’s STBY position to turn on the SB-22.
In STBY position, when the camera’s meter turns off, in
one or two minutes the SB-22 turns off automatically.
To turn the SB-22 on again, lightly press the camera’s
shutter release button.
Note: When the Nikon FA or FE2 is connected to Nikon
Motor Drive MD-12 via a remote cord, the camera‘s meter
stays on and the SB-22 remains on at STBY position.
To Next Page
Loading...
