TTL Multi-Flash Sync Cords SC-18 and
SC-19
Use the SC-18 or SC-19 to connect flash units in TTL
multiple flash operation. The SC-18 is approx. 1.5m
long: the SC-19 is approx. 3m.
Flash Unit Couplers AS-4 and AS-7
To mount the SB-22 on a Nikon F3-series camera with
the DE-2 or DE-3 finder, use the AS-4 or AS-7. The AS-7
lets you change film without removing the flash unit.
DC Unit SD-7
The Nikon DC Unit SD-7 is an optional external power
source. To use it, connect the SD-7’s power cord SC-16
to the SB-22's external power terminal. Even when
powered with the SD-7, the SB-22 still requires bat
teries inside the flash unit—do not remove the
batteries.
52
To Next Page
Loading...
