MD Mode (for Manual
Flash Exposure Control
with Motor Drive
Operation)
At the motor drive (MD) setting,
the SB-22 is able to recycle fast
enough to synchronize with a
motor-driven camera firing con
tinuously up to 6 frames per
second. It is possible to take up to
four full flash pictures in rapid
succession in this way.
To determine aperture with the
SB-22’s aperture selection/shoot-
ing distance range panel in this
mode, read the following.
: SPEEDLiGHT SB-22 ^
It
_ Set the SB-22’s flash
mode selector to MD.
2,Align film speed in use
'with the film speed index.
Note: Lines between the numbers on
the film speed scale represent inter
mediate settings. (See illustration.)
32\
125$^^ I“-
160-
250—E‘
зго'^1^
ьпо-у- 800
640^- 16oo
1000''
1250'
И00
:200
E400
29
To Next Page
Loading...
