•Keep the SB-22 away from salt
water and out ot the rain.
• When not using the SB-22, re
move batteries to avoid damage
due to battery leakage. If leakage
occurs, take the SB-22 to your
nearest Nikon authorized service
facility.
• When the SB-22 is not used, per
form the following once a month:
1. Install batteries, turn on the
SB-22 and fire flash a few
times.
2. Wait until the ready-light comes
on.
3. Turn off the SB-22, and remove
the batteries.
49
To Next Page
Loading...
