45
More on Playback
Viewing Pictures on TV
The MV-11 COOL-STATION and EG-E5000 audio / video (A / V) cable included
with the camera can be used to connect the camera to a television or video-
cassette recorder (VCR).
Choosing a Video Mode
The Interface > Video mode item in the setup menu offers a choice of NTSC
and PAL ( 80). Be sure that the mode selected matches the standard used
in the video device.
1
Place the camera in the COOL-STATION
Turn the camera off and place it in the COOL-STATION.
2
Connect the A / V cable
Insert the black plug into the COOL-STATION’s A / V
out connector.
Insert the yellow plug into the video-in jack on the
television or VCR. Connect the white plug to the
audio-in jack.
3
Tune the television to the video channel
If in doubt, consult the documentation for your television or VCR.
4
Turn the camera on
Press the button for about a second to turn the camera on. The camera
monitor will remain off and the television will show the image normally
shown in the monitor.
Viewing Pictures on TV
To reduce the drain on the battery when viewing pictures for an extended period, use
the supplied EH-63 AC adapter.
PAL
If PAL is selected for Video mode and the camera connected to a video device, video
output will be suspended and the camera monitor will turn on when the camera is in
movie mode.
To Next Page
Loading...
Need help?
General
