48
More on Playback
Transferring Pictures
If PictureProject is installed, the PictureProject Transfer window will be dis-
played in the computer monitor when the camera is connected and turned
on. Pictures can be transferred using the button in PictureProject (see
the PictureProject reference manual CD for details) or by pressing the center
of the multi selector.
Pressing the center of the multi selector ( / button)
copies to the computer all pictures that are marked
for transfer (
69). The following messages will be
displayed in the camera monitor while pictures are
transferred.
During Transfer
Do not turn the camera off, disconnect the USB cable or AC adapter, or remove the
camera from the COOL-STATION while data are being transferred. Failure to observe
this precaution could result in product or computer malfunction.
Transferring Pictures from Internal Memory
Data in internal memory can not be copied to the computer when a memory card is
inserted in the camera. Remove the memory card before attempting to transfer data
from internal memory.
Voice Recordings
PictureProject can not be used to transfer or play voice recordings. Select Mass stor-
age for USB, copy the fi les manually, and then play them back using QuickTime or any
other WAV-compatible audio player. Note that index points created with the camera
can not be used when voice recordings are played back on another device.
PREPARING TO TRANSFER
To Next Page
Loading...
Need help?
General
