43
Changing A (Auto) Mode Settings (Shooting Menu)
More on Shooting
B Notes on Continuous Shooting
• When Continuous, BSS, or Multi-shot 16 is selected, flash is disabled. Focus, exposure, and
white balance are fixed at the values determined with the first picture in each series.
• The frame rate with continuous shooting may vary depending upon the current image mode
setting, the memory card used, or shooting condition.
• There are functions with which this setting cannot be enabled. See “Camera Settings that Cannot
Be Applied Simultaneously” (A 51) for more information.
B Note on BSS
BSS may not produce the desired results if the subject moves or the composition changes while the
shutter-release button is held down.
B Note on Multi-shot 16
Smear (A 158) visible in the monitor when shooting with Multi-shot 16 enabled will be recorded
with images. Avoiding bright objects such as the sun, reflections of the sun, and electric lights when
shooting with Multi-shot 16 enabled is recommended.
To Next Page
Loading...
