168
Error Messages
Technical Notes
This image has been
retouched. Cannot
retouch to reduce
blur.
Image cannot be com-
pensated using vibration
reduction.
Copies from small pic-
ture, crop, or vibration
reduction option cannot
be adjusted using vibra-
tion reduction.
57
Communications
error
E
USB cable disconnected
during transfer or print-
ing.
If PictureProject displays
error, click [OK] to exit.
Resume operation after
turning camera off and
reconnecting cable.
83, 88
[USB] option incorrect. Choose correct [USB]
option.
83, 84
PictureProject did not start.
––
No images are
marked for transfer
s
No pictures selected for
transfer.
Select pictures for trans-
fer in the playback menu
and try again.
86,
112
Transfer error
E
Transfer error. • Check battery level.
• Check that USB cable is
connected.
24
83
System error
u
Error has occurred in
camera’s internal cir-
cuitry.
Turn camera off, remove
and reinsert battery, and
turn camera on. If error
persists, contact retailer
or Nikon representative.
17, 24
Printer error
check printer status
u
Running out of ink or
printer error.
Check printer. After
checking the ink or solv-
ing the problem, select
[Resume] and press d to
resume printing.
(Depending on the error,
[Resume] may not be
available.)
–
Display Problem Solution c
To Next Page
Loading...
