54 More on Photography
2 Choose an AF-area mode.
Highlight an option and press J.
A AF-Area Mode
AF-area mode selections made in shooting modes other than P, S, A, or M are reset when
another shooting mode is selected.
A 3D-Tracking
If subject leaves the viewfinder, remove your finger from the shutter-release button and
recompose the photograph with the subject in the selected focus point. Note that when the
shutter-release button is pressed halfway, the colors in the area surrounding the focus point
are stored in the camera.
Consequently 3D-tracking may not produce the desired results
with subjects that are the same color as the background.
To Next Page
Loading...
