170 Wi-Fi
PIN Entry (Android Only)
1 Enable the camera’s built-in Wi-Fi.
Press the G button to display the menus,
then highlight Wi-Fi in the setup menu and
press 2.
Highlight Network connection
and press 2, then highlight Enable and
press J.
Wait a few seconds for Wi-Fi to
activate.
2 Select Network settings > PIN-entry WPS.
Highlight Network settings and press 2.
Highlight PIN-entry WPS and press 2.
3 Enter the PIN.
Enter the PIN displayed by the smart device.
Press 4 or 2 to highlight digits
and press 1 or 3 to change.
Press J when entry is complete.
4 Launch the Wireless Mobile Utility.
Launch the Wireless Mobile Utility on the smart device.
The main dialog will be
displayed.
G button
To Next Page
Loading...
