64 More on Photography
Manual Pop-up Modes
In P, S, A, M, and 0 modes, the flash must be raised manually. The flash will not fire if it
is not raised.
1 Raise the flash.
Press the M (Y) button to raise the flash.
2 Choose a flash mode (P, S, A, and M modes only).
3 Take pictures.
The flash will fire whenever a picture is taken.
Keeping the M (Y)
button pressed, rotate
the command dial until
the desired flash mode
appears in the
information display.
+
M (Y) button Command
dial
Information display
M (Y) button
To Next Page
Loading...
