114
J
To use Active D-Lighting:
1 Select Active D-Lighting in the
shooting menu.
To display the menus, press the G button.
Highlight Active D-Lighting in the shooting
menu and press 2.
2 Choose an option.
Highlight YAuto, Z Extra high,
P High, Q Normal, R Low, or Off and
press J.
If YAuto is selected, the camera
will automatically adjust Active D-Lighting
according to shooting conditions (note,
however, that the effects may not visible in mode M and when center-weighted
or spot metering is used).
D Active D-Lighting
Active D-Lighting can not be used with movies.
Noise (randomly-spaced bright pixels, fog,
or lines) may appear in photographs taken with Active D-Lighting.
Uneven shading may be
visible with some subjects. Active D-Lighting can not be used at ISO sensitivities of Hi 0.3 or
above.
A See Also
When ADL bracketing is selected for Custom Setting e6 (Auto bracketing set, 0 251), the
camera varies Active D-Lighting over a series of shots (0 139).
For information on using the
Fn button or depth-of-field preview button and a command dial to select an Active
D-Lighting option, see page 255.
G button
To Next Page
Loading...
