Nikon D7100 - Page 333

305
n
The following features are available with CLS-compatible flash units:
1 Not available with spot metering.
2 Can also be selected with flash unit.
3 AA/A mode selection performed on flash unit using custom settings.
A is selected when a non-CPU
lens is used.
4 Can only be selected with camera (0 247).
5 When a non-CPU lens is used, non-TTL auto (A) is used regardless of mode selected with flash unit.
6 Available only in i-TTL, AA, A, GN, and M flash-control modes.
7 Availalbe only in i-TTL, AA, and A flash-control modes.
CLS-compatible flash units
SB-910
SB-900
SB-800 SB-700 SB-600
SU-800
SB-R200 SB-400Commander
Close-up
photography
Single flash
i-TTL
i-TTL balanced fill-flash for
digital SLR
1
zzzz ———z
Standard i-TTL flash for digital
SLR
z
2
z
2
zz
2
———z
AA Auto aperture z
3
z
3
—— — — — —
A Non-TTL auto z
3
z
3
—— — — — —
GN Distance-priority manual zzz—— — ——
M Manual zzzz ———z
4
RPT Repeating flash zz—— — — — —
Advanced Wireless Lighting
Master
Remote flash control zzz— zz——
i-TTL i-TTL zzz—— — ——
[A:B] Quick wireless flash control ——z —— z ——
AA Auto aperture z
5
z
5
—— — — — —
A Non-TTL auto zz—— — — — —
M Manual zzz—— — ——
RPT Repeating flash zz—— — — — —
Remote
i-TTL i-TTL zzzz ——z —
[A:B] Quick wireless flash control zzzz ——z —
AA Auto aperture z
5
z
5
—— — — — —
A Non-TTL auto zz—— — — — —
M Manual zzzz ——z —
RPT Repeating flash zzzz ————
Flash Color Information Communication zzzz ———z
Auto FP High-Speed Sync
6
zzzz z z z —
FV lock
7
zzzz z z z z
AF-assist for multi-area AF zzzz z ———
Red-eye reduction zzzz ———z
Camera modeling illumination zzzz z z z —
Camera flash mode selection ———— — — — z
Camera flash unit firmware update z — z —— — ——
A Auto Aperture/Non-TTL Auto
Unless the focal length and maximum aperture are specified using the Non-CPU lens data
option in the setup menu, choosing auto aperture (AA) when a non-CPU lens is attached
automatically selects non-TTL auto (A).