310
n
LAN adapters
(0 206)
• Communication Unit UT-1 (0 206): When connected to the camera using the USB
cable supplied with the camera, the UT-1 can be used to connect to Ethernet
networks and upload pictures to an ftp server or control the camera remotely
using optional Camera Control Pro 2 software.
Note that the UT-1 requires its
own power source; use an optional EN-EL15 rechargeable Li-ion battery or an
EP-5B power connector and EH-5b AC adapter.
• Wireless Transmitter WT-5: Use in combination with a UT-1 to connect to wireless
networks.
Use of the UT-1 and WT-5 requires a wireless or Ethernet network and knowledge
of how to use it. Always use the latest version of the software supplied with the
devices.
Wireless
mobile
adapters
Wireless Mobile Adapter WU-1a: Supports two-way communication between the
camera and smart devices running the Wireless Mobile Utility.
Accessory
terminal
accessories
The D7100 is equipped with an accessory terminal for
WR-1 and WR-R10 wireless remote controllers (0 130), MC-DC2
remote cords (0 52) and GP-1 GPS units (0 152), which
connect with the 4 mark on the connector aligned
with the 2 next to the accessory terminal (close the
camera connector cover when the terminal is not in
use).
Microphones
Stereo Microphone ME-1 (0 165)
To Next Page
Loading...
