86
r
❚❚ The L (U) Button
At settings other than K (Choose color temp.) and L (Preset
manual), the L (U) button can be used to fine-tune white
balance on the amber (A)–blue (B) axis (0 85; to fine-tune white
balance when L is selected, use the shooting menu as described
on page 84).
Six settings in both directions are available; each
increment is equivalent to about 5 mired (0 87).
Press the L
(U) button and rotate the sub-command dial until the desired
value is shown in the information display.
Rotating the sub-
command dial to the left increases the amount of amber (A).
Rotating the sub-command dial to the right increases the amount
of blue (B).
At settings other than 0, an asterisk (“E”) appears in the
information display.
L (U) button Sub-command dial Information display
To Next Page
Loading...
