Nikon DS-U2 User Manual

Chapter 6 Operation Method
3 Installing the DS-U2 Device Driver
- 19 -
3
Installing the DS-U2 Device Driver
To connect the DS-U2 with a PC, the device driver must be installed in a PC.
For the DS-U2, install the Nikon USB DS Camera (hereafter called "camera driver") and the
Eclipse-i Microscope (hereafter called "Eclipse i-series driver").
The installation procedure is as follows:
Note: Administrator login is required to install the DS-U2 device driver.
(1) Close all the other applications.
To avoid failure in the setup program, be sure to close all system-resident programs such as the
screensaver and anti-virus utility. The procedure for closing the standard Windows screensaver is
indicated in this manual. For other programs, refer to their instruction manuals.
Operation procedure
Shortcut menu
Right-click on the Windows desktop to display the
shortcut menu.
Select Properties on the shortcut menu to open the
Display Properties dialog box.
Display Properties dialog box
Click the Screen Saver tab in the Display Properties
dialog box.
Click the Screen Saver (S) text box and select None
from the list, then click the OK button.
1. Right click on the desktop.
2. Select Properties.
Screen Saver tab
Click None.

Nikon DS-U2 Specifications

General

Brand	Nikon
Model	DS-U2
Category	Camera Accessories
Language	English