Nikon DS-U2 - Troubleshooting; Power Supply Issues

Chapter 8 Troubleshooting
1 Power Supply
- 31 -
8
Troubleshooting
If you experience any troubles, check the troubleshooting list below.
If you are still not able to solve the trouble, consult with your nearest Nikon representative.
1
Power Supply
Trouble Check point
The power cannot be
turned on.
• Be sure that the power cable is connected. Check the power plug, the
wall outlet, the AC adapter, and the 12 VDC IN connector of the DS-U2.
• Check that the power cord supplied with the product is used.
• Check that a specified AC adapter is used.
• Check that the power switch is turned on.
The DS-U2 is hot.
• If the product is used in a hot or narrow place, it may become hot.
Check if there is foreign smell such as burnt odor. If there is, unplug the
power plug and request a repair service.