Nikon Eclipse E400 User Manual

CAUTION
E Installation location
This
product
is
a
precision
optical
instrument.
Using
or
storing
the
instrument
under
unsuitable
conditions
may
damage
it
or
may
have
an
adverse
effect
on
its
precision.
The
following
conditions
should
be
kept
in
mind
when
selecting
the
installation
location.
©
Avoid
installing
in
a
place
exposed
to
direct
sunlight,
or
directly
under
room
lights
or
any
other
bright
place.
The
quality
of
the
view
through
the
microscope
deteriorates
in
bright
surroundings.
@
Install
in
a
place
with
little
dust
and
dirt.
©
Install
in
a
level
place
free
from
vibrations.
©
Install
on
a
sturdy
desk
or
table
that
is
able
to
bear
the
weight
of
the
microscope.
O
Do
not
install
in
a
warm
and
humid
location.
Otherwise,
condensation
or
mold
may
form
on
the
lenses,
degrading
performance or damaging the equipment.
Check the light source
The power supply contained in the microscope provides the power for the halogen lamp as the microscope light
source.
Although
this
power
supply
can
power
a
halogen
lamp
of
up
to
6
V-30
W,
the
specified
lamp
must
be
used.
Use of a non-specified lamp could damage the microscope.
Specified lamp: 6 V-30 W (PHILIPS 5761)
Cautions when replacing the lamp
In order to prevent burns, allow the lamp to cool (for at least thirty minutes after turning off the power) before replacing
the lamp. Furthermore, to prevent electrical shock and damage to the microscope, always turn off the power switch
(flip it to the“ ” side) and unplug the power cord before replacing the lamp.
After replacing the lamp, be sure to attach the lamp cover securely. Never use the lamp without its cover.
Cautions when operating the stage
The stage rack protrudes outward when the stage is moved.
When operating the focus knobs or condenser focus knob, be
careful not to bump your hand on the rack since the end of
the rack may injure your hand.
n em ta aray mmm oem araras rg .. arm ne -en P,

Nikon Eclipse E400 Specifications

General

Type	Biological Microscope
Optical System	CFI60 Infinity Optical System
Nosepiece	Quadruple nosepiece
Magnification	40x to 1000x
Power Supply	AC 100-240V, 50/60Hz
Lamp Power	6V 30W
Eyepiece	10x
Objective Lenses	4x, 10x, 40x, 100x
Stage	Mechanical stage
Focus	Coaxial coarse and fine focusing
Condenser	Abbe condenser, N.A. 1.25
Observation Tube	Binocular
Stage Dimensions	134mm
Interpupillary Distance Adjustment	50-75mm
Diopter Adjustment	+/- 5 diopters
Illumination	Built-in Koehler illumination