Chapter 4 Specifications
42
Specifications
■ Control Box B for Nikon Microscope
Model NI-CTLB
Connected to: Ni-U main body and contact arm
Communication/control Ni-U main body and contact arm
Motorized epi-fluorescence cube turret, intelligent epi-fluorescence cube turret
Motorized nosepiece, intelligent nosepiece
Motorized shutter (up to two units)
Motorized HG precentered fiber illuminator
Simple remote control pad
DS-L3 DS camera control unit
PC
Input ratings 100-240VAC, 50/60Hz, 1.0A
Power cord • When used in 100-120 V regions outside Japan
UL listed detachable power cord set, 3 conductor grounding
(3 conductor grounding Type SVT, No.18 AWG, 3 m long maximum, rated at 125 VAC minimum)
• When used in 220-240 V regions
Detachable power cord set approved according to EU/EN standard, 3 conductor grounding
(3 conductor grounding Type H05VV-F, 3 m long maximum, rated at 250 VAC minimum)
• When used inside Japan
PSE approved detachable power cord set, 3 conductor grounding
(3 conductor grounding Type VCTF 3 x 0.75 mm
2
, 3 m long maximum, rated at 125 VAC minimum)
■ Simple Remote Control Pad for Nikon Microscope
Model NI-SRCP
Connected to: Control box B
Control Motorized epi-fluorescence cube turret
Motorized nosepiece
Motorized shutter (up to two shutters)
Motorized HG precentered fiber illuminator's ND value, shutter
Switch/indicator Eight function switches
One operation toggle switch
10 LED indicators