33
12
Confirm “E” is displayed in the
top LCD panel and viewfinder,
and film rewind is complete.
13
Open camera back and remove
film cartridge.
• If film rewind does not start, check
battery power. See page 20.
• If film rewind has stopped at mid-
roll, check the battery power. If
battery power is insufficient, turn
the power switch off, replace
batteries with a fresh set, turn
power on, then press 1 „ button
and turn 2 „ lever to restart film
rewind.
• If you accidentally press 1 „
button, lightly press the shutter
release button. The film advances
one frame without exposure and
1 „ button pops up.
To conserve battery power, turn off
the power switch when you are not
using the camera. Always remove
batteries before storing a camera to
prevent damage due to leaking
batteries.
P400 (E) 02.12.27 6:42 PM Page 33
To Next Page
Loading...
