83
3
Fully depress shutter release button.
Self-timer LED starts blinking and
shutter will be released after 10 sec.
During the final two seconds, the LED
lights up warning you to get ready for the
shot.
• To cancel self-timer operation, turn the
film advance mode selector/self-timer to
another position.
c
The self-timer
duration can be
changed to any interval from 2 to 60
sec. by using Custom Setting #16.
See page 90.
• In Single Servo AF with Focus-
Priority, self-timer operates only
when the in-focus indicator ˇ
appears in the viewfinder. Once
self-timer starts, shutter will be
released even though subject is
out of focus at the time of shutter
release.
• Selecting buLb automatically sets
the shutter speed to 1/250 sec.
P400 (E) 02.12.27 6:42 PM Page 83
To Next Page
Loading...
