69
2
Rotate Main-Command Dial until desired shutter speed or
aperture value appears in the viewfinder and top LCD
panel. The Flexible Program indicator (§) appears to indicate
the program has been shifted or changed.
• The shifted program is maintained unless you rotate the Main-
Command Dial to the previous shutter speed/aperture.
Flexible Program is canceled when you switch the exposure
mode to another mode, pressing ‚ and · buttons simul-
taneously to activate Two-Button Reset or turn off the power
switch.
P400 (E) 02.12.27 6:42 PM Page 69
To Next Page
Loading...
