76
3
Adjust shutter speed and aperture
by rotating the Main- and/or Sub-
Command Dials until the electronic
analog exposure display shows desired
exposure.
4
Recompose the picture and shoot.
• In Single Servo AF mode, if recompos-
ing the picture could change subject-to-
camera distance, refocus by briefly
removing your finger from shutter
release button and lightly pressing it.
• Continuous Servo AF is not recom-
mended if the subject becomes off-
centered after recomposing.
P400 (E) 02.12.27 6:42 PM Page 76
To Next Page
Loading...
