78
2
Once set, exposure compensation remains fixed until
reset.
= and the compensated value remain on in the top LCD panel.
Although the = symbol in the viewfinder stays on to indicate
that exposure compensation is on, the compensation value
disappears from the readout when you remove your finger from
= button. To confirm compensation value in the viewfinder,
press = button again.
3
After shooting, be sure to reset the amount of compensa-
tion to ā0.0ā to resume normal operation.
P400 (E) 02.12.27 6:42 PM Page 78
To Next Page
Loading...
