26
100
200
50
Manual Film-Speed Setting
Tips
Set the film speed manually in the following cases:
1) When using non-DX-coded film.
2) To intentionally change the light sensitivity of DX-coded film in order to obtain
special effects when developing.
...
The film speed can be set manually in the range of ISO 12 to 6400.
Setting the film speed
• Pull and rotate the film-speed setting
ring and set it to the film speed of the
film in use.
Details on readings of the film-speed index
• The corresponding film speeds for the
dots between numbers on the film
speed index are indicated in the illus-
tration.
To Next Page
Loading...
