34
4000
2000
1000
500
250
1
2
5
6
0
3
0
1
5
8
4
2
1
B
A
Procedure for TTL flash photography
The following example shows the Nikon SB-27 Speedlight attached to the camera. For
details, refer to the manual for your speedlight.
Flash Photography (Continued)
...
Set to A. Or, set to a shutter speed of 1 to 1/
250 second.
3
Confirm that the mark lights in
the viewfinder.
...
Lightly press the shutter-release button and
check the ready light.
Compose your picture and focus.
4
Tips
• Applicable film speeds for TTL auto flash are ISO 12 to ISO 1000.
• The flash-sync speed is 1/250 second or lower. In Aperture-Priority Auto Exposure
mode, the speed is automatically set to 1/250 second.
...
When you use a Medical lens, set it to 1/125 second or lower.
Set the exposure mode.
1
2
Set the mode switch of the
speedlight to AUTO.
(Example: with SB-27)
To Next Page
Loading...
