Nikon MONARCH 2000 - Internal Display Guide

10
En
Fr
 Internal display
1 Target mark
: Aim at the target you want to measure.
Position the target at the center of the mark.
2 Laser irradiation mark
: Appears while the laser is being irradiated for a
measurement. Do not look towards the objective lens
side while this mark is shown.
3 Unit of measure (m: meter/YD: yard)
4 Distant Target Priority mode
5 Battery level indicator
6 First Target Priority mode
7 Horizontal distance mode
8 Distance
: “Failure to measure” or “Unable to measure”
7
5
4
3
2
6
8
1
• The internal display of this product is enlarged by the eyepiece. Although you may see dust that has
entered, it does not effect the accuracy of measurement.