Nikon N Series User Manual

Nikon N Series/K Series Total Station Instruction Manual 107
Menu Key 5
Press OK or [ENT] to input the end point.
5. The information on the end point of the traverse
measurement is displayed.
If the end point has no coordinate data, the
window on the right will be displayed. Select
[Yes] and enter the coordinates of end point. In
case of closed-loop traverse, FS also needs to be
the known point.
Press
[ENT] in the AZ field to proceed to the
calculation result display of the traverse measurement.
6. The closure error and precision of traverse
measurement are displayed.
Press the
Sett soft key to specify the method
for distributing the error.
* Method for coordinate error distribution
7. Press the Adjust soft key or [ENT], and the value
with angular error allocated is displayed.
dHA: Angular closure error
dHD: Horizontal closure distance
Prec: Precision of the traverse
Denominator of the ratio of linear misclosure
divided by the traverse total length.
dN: N coordinate closure distance
dE: E coordinate closure distance
dZ: Z coordinate closure distance
Setting Item Selection Item
Method* Compass/Transit
Angular Weighted/Linear/None
Elevation Weighted/Linear/None

Nikon N Series Specifications

General

Brand	Nikon
Model	N Series
Category	Measuring Instruments
Language	English