Nikon N Series - Refline S-O

Nikon N Series/K Series Total Station Instruction Manual 73
Applications 4
3. Enter the total stake number in the Span total
field.
The observation screen for the first stake (from
the instrument) appears.
4. Sight the prism and press
[MSR1] or [MSR2].
5. Use
[^] or [v] to change the guide point. You can
calculate and guide up to double the number of
the stakes.
6. To record the point as an SO record, press
[ENT].
RefLine S-O
This function allows you to stake out a point based on the Sta, O/S, and dZ to a
specified line.
1. Press
[4] or select
RefLine S-O in the Stakeout menu.
For example, if you measure to the end point at 100 m from the instrument and set the span total to 2, the
following four points are calculated and can be staked:
<1/2>
HD
<2/2> <3/2> <4/2>
50 m 100 m 150 m 200 m