Nikon N Series User Manual

2 Preparation
12 Nikon N Series/K Series Total Station Instruction Manual
Detaching and Re-Attaching the Battery Pack
Detaching the battery pack
C
CAUTION – Avoid touching the contacts on the battery pack.
1. If the instrument is turned on, press [PWR] to turn it off.
2. Press the battery case mounting button, detach the battery pack from the
instrument, and remove the battery from the battery case.
Attaching the battery pack
Before attaching the battery pack, clear any dust or other foreign particles from the
battery contacts.
1. Hold the instrument steady with one hand.
2. Fit the two projections at the bottom of the
battery case into the concave sections at the
bottom of the instrument.
3. Press the battery case mounting button.
4. Push the battery pack against the instrument
and release the battery case mounting button.
Make sure that the battery case mounting
button is fully released and the battery pack
is securely attached to the instrument.
C
CAUTION – If the battery pack is not attached securely, this could adversely affect the
watertightness of the instrument.
C
CAUTION – BC-65 battery pack cannot be used with N Series/K Series.
5
6
4
2
3
1

Nikon N Series Specifications

General

Brand	Nikon
Model	N Series
Category	Measuring Instruments
Language	English