Nikon N Series User Manual

5 Menu Key
130 Nikon N Series/K Series Total Station Instruction Manual
Searching records
You can search for records by their type, point name, code, or by any combination of
these values.
Searching raw records
In the RAW screen, press the
Srch softkey to access
the raw data search function.
To find a point by name, enter the name in the PT field
and press
[ENT] twice.
You can use the asterisk (*) as a wildcard. For
example, when you enter
30* in the PT field, the
search matches the points named 300, 301, 302,
3000A2, and 3010.
If more than one point matches the search criteria, the
matching points are displayed in a list.
Use
[^] or [v] to highlight the point you want to use. Then
press
[ENT] to select it.
Detailed data for the selected record appears. Press the
DSP softkey to change the fields shown.
Press
[ESC] to return to the list.
To search by point type, move to the Type field and use [<] or [>] to change the
selected point type. The options are ALL, ST, SS, SO, CP, CO, CO(SY), and
CO(RDM).
If you selected ST, SO, F1, or F2 in the Type field, you do not have to enter a value in the CD field. Press [ENT] in
the PT field to start the search.
If you selected CO, CO(SY), or CO(RDM) in the Type field, you cannot enter a value in the PT or CD fields.
Press [ENT] in the Type field to start the search.

Nikon N Series Specifications

General

Brand	Nikon
Model	N Series
Category	Measuring Instruments
Language	English