Nikon N Series User Manual

Nikon N Series/K Series Total Station Instruction Manual 29
Getting Started 3
Starts distance measurement, using the measure mode
settings for the
[MSR2] key.
Displays measurement mode settings, if held down for one
second.
page 49
Moves to the next available display screen.
Changes the fields that appear on the DSP1, DSP2, and
DSP3 screens, if held down for one second.
page 51
Displays the Angle menu. page 54
Displays the Station Setup menu.
In numeric mode, enters 7. In alphanumeric mode, enters
A, B, C, or 7.
page 56
Displays the Stakeout menu.
Shows stakeout settings, if held down for one second.
In numeric mode, enters 8. In alphanumeric mode, enters
D, E, F, or 8.
page 68
Displays the Offset Point Measurement menu.
In numeric mode, enters 9. In alphanumeric mode, enters
G, H, I, or 9.
page 89
Displays the Programs menu, which contains additional
measuring programs.
In numeric mode, enters 4. In alphanumeric mode, enters
J, K, L, or 4.
page 75
In numeric mode, enters 5. In alphanumeric mode, enters
M, N, O, or 5.
Displays RAW, XYZ, or STN data, depending on your
setting.
In numeric mode, enters 6. In alphanumeric mode, enters
P, Q, R, or 6.
page 40
Executes the function that is assigned to the
[USR1] key.
In numeric mode, enters 1. In alphanumeric mode, enters
S, T, U, or 1.
Executes the function that is assigned to the
[USR2] key.
In numeric mode, enters 2. In alphanumeric mode, enters
V, W, X, or 2.
page 39
Opens a window where you can enter a code. The default
code value is the last code entered.
In numeric mode, enters 3. In alphanumeric mode, enters
Y, Z, a space, or 3.
page 36
Key Function Details

Nikon N Series Specifications

General

Brand	Nikon
Model	N Series
Category	Measuring Instruments
Language	English