NOTE
:
Setting
Exposure
Compensation
Normally, you should compensate exposure
to
the + side when the background is
brighter than your main subject, or to the - side when the background is darker.
2
Compose picture, confirm focus
indicator.
and
shoot.
•
To
cancel Exposure Compensation, rotate the
Command Dial while pressing the
~
button
to
reset the compensation value
to
a.
a.
In
Vari-
Program, changing the exposure mode also
cancels the Exposure Compensation. (Turning
the power switch off does not cancel the
Exposure Compensation.)
Ch
eck
points
• The Exposure Compensation cannot be set
in
8
or
M exposure mode. I
• Once the Exposure Compensation is set
in
each P, S
or
A exposure mode,
compensation remains
in
that exposure mode. Changing the exposure mode to M,
8
or
Vari-Program temporarily cancels the compensation.
• Exposure Compensation set
in
Vari-Program is canceled when exposure mode
is
changed.
• If the exposure compensation is set when the built-in SpeedJight is used, the flash
output level is also compensated.
65
To Next Page
Loading...
