Nikon N55 - Using the Built-In Speedlight

Using Built-In Speedlight
This section explains how to use the built-in Speed light set to desired flash
sync mode wh
en a G- or D-type AF Nikkor lens is attached .
. . . . . . . . . . . . . . . . . .. . . . . . . . . .. . . . . . .. . . . . . . . . .. . ... . . .
1
In P, S, A or M exposure mode , release the built-in
Speedlight
by pressing the 0 flash lock -release button. In
8 or Vari-Program (except in rJ or ~ ~ ) , when the subject
is dark or backlit and the shutter release button is lightly
pressed, the built-in Speedlight automatically pops up .
In P, S, A or M exposure mode
In 8 or Vari-Program
(except
rJ or ~ Q )
• When the subject is dark or backlit and shutter release button is lightly pressed,
the flash recommended indication
~ blinks in the viewfinder in P, S, A or M
exposure mode.
To use built-in Speedlight, press the 0 flash lock-release button.
• In
8, 1" or .:r" AUTO ~ is displayed in the LCD panel; in ~ , ~~ 6 ~ ~ is displayed.
• When the Speed light is ready to fire,
~ appears without blinking in the viewfinder
(when the camera's meter is
on).
• Press the Speed light down gently until it clicks into place to retract it.
2
Set the flash sync mode by rotating the Command Dial while
pressing the 0 flash sync button .
80