Lens aperture Instant-return type, with depth-of-field preview button
Autofocus
TTL
phase detection, Nikon Multi-CAM900 autofocus module
• Detection range:
EV
-1 to
EV
19
(ISO
100, at normal temperature)
Lens servo
• Single Servo
AF
(5), Continuous Servo
AF
(C), Manual focus (M)
• Focus Tracking automatica
ll
y activated in subject's status
in
Single
Servo
AF
(5) or Continuous Servo
AF
(e )
Focus area
One of
fi
ve focus areas can be selected
AFArea
mode
• Single Area
AF
• Dynamic
AF
(Dynamic
AF
Mode with Closest Subject Priority
is
availabl
e)
Focus
lock
Focus is locked by pressing • button or lightly pressing shutter
release button in Single Servo
AF
Metering system TTL full-aperture exposure metering system
Three metering systems selectable (limitations with lens used)
• 3D Matrix Metering
• Center-Weighted Metering: Approx. 75%
of
the meter's sensitivity
concentrated on the 12mm dia. circle
• Spot Metering: 4mm dia. circle (approx. 1 %
of
en
tire frame)
Metering range 3D Matrix Metering:
EV
0-21
Center-Weighted Metering:
EV
0-21
Spot Metering:
EV
3-21
(at
normal temperature,
ISO
100, f/1
.4
lens)
Exposure
meter
coupling
CPU
Exposure
compensation
Exposure compensated in ±3
EV
range,
in
1/2 steps
Auto Exposure Lock Detected exposure value locked by pressing • button
Auto Exposure Bracketing range: ±2
EV;
number
of
shots: two or three; bracketing
Bracketing steps: 0.5, 1, 1
.5
or 2
EV
Film speed setting
• OX or manual selectable
• Film speed range: O
X:
IS0
25-5000, Manual:
ISO
6-6400 in 1/3
steps
105
To Next Page
Loading...
