Multiple
Exposure-continued
3
Compose picture, confirm focus
indicator.
and
shoot .
64
• The first shot is taken when the shutter release button
is
fully depressed.
The film does not advance and multiple exposures can be taken from the
second shutter release.
•
~
blinks
in
the viewfinder when the first shot is taken. The frame counters
in
the LCD panel and viewfinder do not count up and the counter display
blinks .
•
To
cancel multiple exposure, set the film advance mode selector to a
position other than
~.
Film is advanced when the exposure rneter is on or
the shutter release button is lightly pressed. When the film is advanced, the
frame counter counts up.
~
1'-1:
The film advance mode
in
multiple exposure
is
normally set to single-
frame shooting. However, it can be set to continuous shooting (page
74).
To Next Page
Loading...
