• Menu number and Custom Setting options
•
Refer
also to the Custom Setting
Menu
table at the
end
of
th
is instruction
manua
l.
:.
Automatic film rewind at
the
end
of
film roll (page
29
)
Options: G: Activated (initial setting)
:: Disabled
At initial setting, film rewind is automatically started when the end of the film
roll is reached. However, the camera can be set not to rewind film at the end
of
the film roll but instead film rewind is started by pressing the
two
film
rewind buttons
e"
for more than 1 sec.
2. Reset to DX film speed setting for new film (page
36)
Options:
G:
Activated (initial setting)
::
Disabled
At initial setting, film speed automatically sets to
ID:!
when a new film roll is
loaded even after manually setting film speed to other than
ID:!.
However, the
film speed setting can be changed to remain the same.
3. Bracketing order (page 62)
Options: G: Metered value, under, over (initial setting)
:: Under, metered value, over
Bracketing is normally performed
in
the order
of
the initial setting (page
62)
.
However, this Bracketing order can be changed to be performed from
negative compensation to positive compensation.
'i. On-Demand Grid Lines superimposition display (page
5)
Options: G: Not displayed (initial setting)
::
Displayed
At initial setting, On-Demand Grid Lines (page
5)
are not displayed
in
the
viewfinder. However, they can be set to be displayed.
71
To Next Page
Loading...
