36
VA: 114°27´40" ■■■
HA: OVER RUN
(9) Divide the final horizontal
angle reading by the number
of repetitions to calculate the
average angle value.
Example: If the final reading after 8 repetitions is 360°01’20",
the averaged reading will be:
360°01'20"/8 = 45°00'10"
To cancel or return to normal operation following repeat
horizontal angle measurement, depress the [HOLD] key again
until the third beep of the buzzer (approx. 1 sec.).
The maximum summed readout range is less than
±2000°/±2222.2222G.
If exceeded, the “OVER” warning will be displayed and
operation stops.
To reset, rotate the instrument in the reverse direction to display
the most recent repeat horizontal angle reading.
• Repeat measurement cannot be performed when the MIL unit is selected.
VA: 114°27´40" ■■■
HA: 360°01´20" RUN
To Next Page
Loading...
