14
2. Putting the Batteries in the Battery Pack
WARNING
■ Never short-circuit the electrodes of the battery, or never burn
or heat the battery. Doing so may cause rupture, fire, burn or
instrument damage.
CAUTION
■ Please note, the dry cells provided at delivery are to be used
only to check the instrument functions prior to use. When
using the instrument for the first time, please ensure that you
replace the supplied dry cells.
■ The dry cells in the battery pack for this instrument are not
rechargeable type. Do NOT recharge the dry cells.
■ Install the battery with its anode and cathode set correctly.
■ Do not use a new dry cell together with an old one or other
types of cell.
■ Do not solder the dry cells.
■ Immediately remove the exhausted dry cells from the battery
pack.
■ Avoid storing the battery pack in direct sunlight, high
temperatures and excessive humidity.
■ Before attaching the battery pack, clear dust or other foreign
particles from the battery socket. Place the battery pack in
the socket and press against the instrument until the mounting
button is locked at the top surface of the battery pack. If the
battery pack is not attached securely, it could adversely affect
the watertight structure of the unit.
To Next Page
Loading...
