Need help?Do you have a question about the Nikon NPL-352 and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Distance accuracy with prism | ±(2 mm + 2 ppm × D) |
| Telescope magnification | 30x |
| Accuracy | 2" |
| Angle measurement method | Absolute |
| Angle accuracy | 2" |
| Distance measurement with prism | 2, 300 m (7, 500 ft) |
| Display resolution | 1" |
| Battery Life | Approx. 30 hours |
Overview of the safety section and key points to read.
Details on the NPL-362/352/332 as a Class 1 laser instrument and hazards.
Explanation of warning and caution conventions and specific safety instructions.
Instructions for safely removing and storing the instrument.
Procedures and important notes for battery charging and discharging.
Step-by-step guide for setting up the tripod correctly.
Methods for centering the instrument over a station and leveling it.
Instructions for sighting targets and preparing them for measurement.
Guide to assembling and setting up the prism reflector.
Procedure for turning the instrument on, initializing HA, and turning it off.
How to select a language and configure regional settings.
Overview of the instrument's keyboard, LCD display, and key functions.
Procedures for entering points, codes, and managing jobs.
Instructions on how to sight prisms and measure distances.
Performing horizontal angle resets and related operations.
Methods for setting up the instrument station.
Guidance on stakeout operations by angle/distance or coordinates.
Using programs for line measurements, arc calculations, and offsets.
Creating, opening, deleting, and managing jobs.
Performing coordinate geometry calculations like inverse and intersections.
Configuring job settings for angle, distance, coordinate, and units.
Viewing, editing, and searching raw, coordinate, and station records.
Configuring shortcut keys and performing instrument calibration.
Procedures for checking and adjusting plate and circular levels.
Steps to check and adjust the optical plummet for accuracy.
Checking and correcting vertical scale and horizontal angle zero point errors.
Procedure to verify the instrument constant for distance measurements.
Technical details of the telescope and EDM system.
Specifications for angle measurement accuracy and precision.
Details on measurement speed and included standard components.
Specifications for the battery pack and external device connector.
Diagram illustrating the main instrument and accessory components.
Procedure for uploading coordinate data and record formats.
Instructions for uploading point name and code lists.
Formats for downloading data in Nikon RAW and SDR formats.
Troubleshooting messages related to angle and cogo functions.
Error messages for data upload, duplicate points, and data format issues.
Error messages related to job management and program execution.
Error messages for data storage, recording, and search functions.
Error messages concerning settings changes and stakeout input.
Error messages encountered during station setup procedures.
To Next Page
