Nikon SB-26 - System Chart for TTL Multiple Flash

SB-26 SB-26
Precaution for SC-19/
SC-18 connection
Neither of these cords
should be used for
connecting one cam-
era/ Speedlight combi-
nation to another.
135134
SB-21B
SC-23
SB-11
SB-14•140
SB-16B
SB-24
SB-22
SB-15
SB-20
AS-10
SB-16A
SB-16B
SB-24
SC-18
SC-19
SC-18
SC-19
B
B
A
AS-10
SB-25
SB-25
SB-17
AS-11
B
SC-18
SC-19
B
SB-26
SB-26
SB-26
SB-27
SC-18 (1.5m/4.9 ft.)
SC-19 (3m/9.8 ft.)
Using SC-18 or SC-19, up to five flash
units can be used for multiple flash pho-
tography, at a total length of 10m (33 ft.).
Slave flash
unit
Chapter
4
System Chart for TTL Multiple Flash
SC-14
SC-24
SC-17
SB-21A
SB-16A
SB-17
SB-11
SB-14•140
SC-23
SB-21B
SB-15
SB-16B
SB-20
SB-22
SB-23
SB-25
SC-17
A
A
A
A
A
A
A
A
A
A
SB-24 SB-26
SB-27
• The SB-11, SB-14, SB-140 and SB-21B cannot
be used with the F-401/N4004 or F-401s/N4004s
either as a master or slave unit.
• The SB-21A and SB-23 Speedlights cannot be
used as slave units.
V-Type
Sync Cord
Master
flash unit
F5 (with DA-30/DP-30),
F90X/N90s, F90-Series/N90,
F70-Series/N70
F5 (with DW-31/DW-30)
F4-Series (with DW-21/DW-20)
F4-Series (with DA-20/DP-20),
F-801/N8008, F-801s/N8008s
F-601/N6006, F-601M
/N6000
F50-Series/N50, F-401x/N5005
F-501/N2020, F-401s/N4004s,
F-401/N4004, F-301/N2000
FA, FE2, FG
Nikonos V
F3-Series
SB-26 (E) 03.1.14 7:16 PM Page 134