• Keep the SB-26 away from high tem-
peratures, and do not store in a
damp place.
• When not using the SB-26, remove
batteries to avoid damage due to
battery leakage. If leakage occurs,
take the SB-26 to your nearest Nikon
dealer.
• When not using the SB-26, perform
the following once a month:
1. Install batteries, turn on the
SB-26.
2. Wait until the ready-light comes
on.
3. Fire flash a few times to refresh
the main capacitor and length-
en the unit’s life.
4. Turn off the SB-26, and remove
the batteries.
Tips on Speedlight Care
• To remove smudges, wipe with a sili-
con-treated or other soft, dry cloth.
Never use thinner, benzine or alcohol
— they might damage plastic parts.
• Never disassemble or repair the
Speedlight. If the SB-26 malfunc-
tions, take it immediately to an
authorized Nikon dealer or service
center.
• Keep the SB-26 away from salt
water and out of the rain.
Chapter
5
SB-26 (E) 03.1.14 7:17 PM Page 140