F-5
Tips on Speedlight Care and Reference Information
En-03
F
Warning indicator Cause Solution
0
The attached color lter has
not been detected.
Conrm whether the
color lter is correctly
attached.
E-7
There is no ash output
that corresponds with the
camera aperture used.
Reset the aperture.
―
The aperture is not at its
maximum f-number.
Set the maximum
f-number.
―
The camera is turned o. Turn the camera on.
―
Power zoom function does
not work properly.
• Turn the SB-5000 o
and on again.
• If the warning
indicator remains,
contact your
retailer or Nikon-
authorized service
representative.
―
To Next Page
Loading...
