Nikon SB-5000 - Attaching and Securing the Speedlight; Attaching the Speedlight to Camera; Locking the Speedlight Securely

B-16
B
Operation
En-03
Low battery power indicator
When battery power is low, the icon
shown at the left appears on the LCD
and the SB-5000 stops functioning.
Replace or recharge batteries.
STEP 2
Attaching the SB-5000 to the camera
Make sure the SB-5000 and the
camera are turned off.
Make sure the mounting foot
lock lever is on the left (white
dot).
Slide the SB-5000’s mounting
foot into the camera’s accessory
shoe.
Turn the mounting foot lock lever
to L.
v Lock the Speedlight in place
Turn the mounting foot lock lever
clockwise until it stops at the mounting
foot lock index.